How do i get my ULE trigger to become more reactive? I already have 4 shims in it.
-
-
More shims. Or turn up your input pressure to the gun from your adjustable tank. -
my tank isnt adjustable. i have the Pure energy 68/4500 tank. the tag says its preset between 750 to 850 psi.Comment
-
when you get up to about 6 shims, they start to get REALLY reactive, just keep on adding shims until you can't fit anymore in the body
Comment
-
i tried putting in six but the valve wont slide into the body with that many. 5 is still pretty good though.Comment
-
It depends on the body and valve combo that you have....
I just set up an e-mag valve in a classic stainless body, I got 8 shims in it, however, it does short stroke quite a bit
got to remove one out of it, but I can't be bothered @ the moment
Comment
-
does reducing the shims lower SS?embargo backwards = o grab me
"Guns dont kill people, husbands that come home early do." -Larry The Cable Guy
Dragun Drallion, nexus kit, tickler, e2, pysco 5" drop w/ on off, macroline, A+ bolt and back block, Oydessy 3 barrel kit, armson stealth, 15* ASA, Kapp pump arm, Black Magic, warp feed w/ 12v upgrade, halo b w/ vic&rip, 91/4500 bulldog
Tippmann 98C ebolt, lp kit, m-16 kit, palmer stabilizerComment
-
IF you (god forbid) cut off the top of the body so you could drop the valve in from the top, you'd be abel to put as many shims as you want in it... That COULD be itneresting. And easy to do.. Hell a hacksaw even.
"Ask not what your country can do for you; ask what you can do for your country." -JFKComment
-
does reducing the shims lower SS?embargo backwards = o grab me
"Guns dont kill people, husbands that come home early do." -Larry The Cable Guy
Dragun Drallion, nexus kit, tickler, e2, pysco 5" drop w/ on off, macroline, A+ bolt and back block, Oydessy 3 barrel kit, armson stealth, 15* ASA, Kapp pump arm, Black Magic, warp feed w/ 12v upgrade, halo b w/ vic&rip, 91/4500 bulldog
Tippmann 98C ebolt, lp kit, m-16 kit, palmer stabilizerComment
-
What's SS?Comment
-
Short stroking.
And no, more shims will actually decrease the chance of short stroking.Last edited by warbeak2099; 02-27-2005, 09:23 PM.Comment
Comment