Problem with ULT

[z28ss43]

I am having issues with my new "paradigm". It has the level10 bolt and the ULE Trigger upgrade. I dont happen to know how many shims are installed in the gun stock. The problem is when I fire, sometimes the trigger bounces back before my finger has been able to release it causing it to fire and then the pin behind the trigger isnt making contact and while the trigger retrains the "gassed up" feel to it, it will not fire. The only way i have found to "un-jam" it, is to depress the trigger and slide my finger off it as fast as I can. Then the gun starts to fire like normal. It feels like I am short stroking or something, (im new to mags) - for the most part, slow firing works okay. Anyone know what the problem might be? I am running an Apocalypse2k tank with the output around 800psi. I have been trying to give it a little more PSI but its a pain in the butt with the trigger locking back! (plus no one has enough pressure to give me a full fill ... )
Thanks in advance for the help!
Ryan
Paradigm - ULE body, ULT, Level10, Apoc2k

[Alpha]

Okay, it should have come with some Level 10 and ULT shims.

You need one ULT shim.

Take the valve out of your marker.

Now, look to where the ULT is installed. Pull it out.

CAREFULLY twist the two halves of the ULT apart. The pin is not udner warrantee, so be careful.

There should be some shims in tehre right now. Take one of your ULT shims and put it in ther.

Screw it all back togethor, put it in the valve, adn put teh valve back into the gun.

Try that, if that doesn't work, try one more shim.

Also, what kind of tank are you using? Make sure its screwed in all the way. If the pin isn't depressed all the way, it will choke it of air, adn it will cycle, but it'll take a bit to reset.

If that doesn't fix it, its probably a bolt stick. In that case, drop me an IM at "TheAlphaMag" And I'll walk you through how to fix that.

EDIT: And on the pressure matter, is that tnak the adjustable one? IF yes, turn up the reg a little bit. Try to put out at LEAST 850PSI. 900 tops. More pressure will make more reactivity in the trigger, but At the pressure your runnign right now, I think it will work to add a shim

And if all else fails, talk to rogue, he's a good guy adn I'm sure he'll stick with his products.