I whould like to put Warp feed on a Automag classic with powerfeed. I guess i need to install some kind of ball detent right? Anything else? Can it be done at all w/o double feeding probs?
-
-
i think there a slip on adapter to the powerfeed -
All you need to do is connect the hose the the powerfeed with or without the adapter. No new detents are needed you won't have any double feeding problems.Comment
-
Right, so no detents nedded then? Great. Too bad i have a power feed pointing to the left then. Guess i can't get it as low profile as yours since i'm pretty sure i don't want to draw the hose to the other side. Ah well... I guess i'll come up with something...Comment
-
You don't need detents, because that's what the barrel nubbins are for. and Why not take it to the other side? just get the long powerfeed plug for the top and take the hose under the barrel. That's what I'm going to do as soon as my long plug get here for my emag.Comment
-
Yeah, at first i thought the hose whould be a big target if i attached it to the "outside" of my marker, but when i tried taking aim in front of amirror i realized that my hand and shoulder whould stick out about the same so i whould be hit anyway. Plus i whould get a whole lot better field of view down the barrel on the left side where i aim so i guess i will go for that setup after all.Comment
-
Are you left handed or right handed? And you said your hopper sticks up and to the left, so run the hose underneath the boy. Easiest way to do it-
Take the 90* adapter, put it on the output hole on the warp. Run the hose under the trigger guard and up to the powerfeed. Use the long powerfeed plug.Comment
-
Originally posted by Vomitsquad
Mags don't use detents, they use Nubbins.
Just make sure you get the newer plastic type from the Airgun store.
Comment
Comment