My automag is choing balls no stop!!

[frogblader]

Hey i just bought my automag rt from my cuz and it worked great when i shot it. but the i asked him to tak it apart and clean it before i get it. soo he did and now the sear pin seems to want to stay in the trigger but does pop out when u put air in it. then i noticed that when i shoot the automag it shoots fast if you hold in a certian spot. soo today i when to show my friend and shot it and it was choping like crazy soo i got mad.. i when in the chat rooms and some said send it in but i have no money i wondering if someone could help me out if u can my email is [email protected] or im Aol instant messager is offspring781

[Chronobreak]

try and be more specific..i know the guns enw to you but its hard to help general problems

chopping=shortroking, not fast enough hopper or bad paint

sounds like the LVLX needs to be retuned to me. also oil the gun

i assume your using nitro as well...

[frogblader]

reply

yea i am using n2 is it possiable that there is not enough air going thru to make the bolt go all the way?? and is there a spring inside the trigger frame that makes the sear pin *** out to him the triiger?

[logicmag19]

Are your running it with a hpa tank? I'd oil it up and see what happens. Do you know how to strip it down and do that?

[Duzzy]

Do you have a Level10 bolt system, I didn't see any mention of it in your first post. Also, the gun firing when it is aired up happens to me, before you screw in the air tank take the safety off and pull the trigger to make sure the spring isn't still "armed" if you will. See if that helps. If not, always air up before putting a hopper on and use a barrel plug.

[Yuck-Mag]

Whats wrong is your short stroking. If you have the original benchmark frame they tend to do that. And the holding it in a certain spot and it shoots faster is called sweet spotting, a perfectly legal (most of the time) trigger happening. Buy a level 10 upgrade kit as soon as you can, kill a hobo if you need to its that neccesary.

[UTDragun]

my mag has x valve, lvlx, logic 90*, and ult. it chops all the time, it also leaks on certain days but not others, the bolt gets stuck forward sometimes, and when i sweetspot i get 20bps, it chops like crazy but usually only after 1 ball breaks, then more follow to the dark side.

im not sure, but some of my problems may be contributed to once a ball breaks, it gets all over my bolt and springs and stuff, but why it breaks the first time is a good question. it origanlly was b/c my detent was too far out and it would double feed. now, who knows? not me.