Automag- not firering

[StormRage]

Ok here is my mag

I turn on the Co2 and i hear the response trigger kick forward... so the air is getting to the gun... but i pull the trigger and nothing! Please Help Me Out here

[undescriptive]

try turning the velocity adjuster @ the back of the gun clockwise - it should fire then, but make sure you oil it plenty good in the first place.... oil is your new very best friend!

[StormRage]

The wierd thing is that it will work sometimes... but then randomly quit working other times. i tryed turning up the velocity but it doesnt change anything??? I dont get it

[tdogreb]

If you have a level 10 installed, you need to go to a larger carrier to prevent bolt stick.

[Little_Ho]

hi
i had the same problem with my Classic RT. All i did, was taking out the On/Off and oiled every single Oring and put 3-4 Drops in the hole. After that i dry fired 20-30times. After that everything was good. The thing i recorniced was that after i pulled out the On/Off the Pin was still in the Valve. So he sticked in the bottom O-Ring. Then see above.

Oil was the magic word for me and my Classic RT.

Hope that helps.