mag wont shoot

[cdacda13]

i have a 68 classic with level 10 and intellifame.
and it will not shoot. I gave it to me lock pro-shop to fix a leak and they replaced the on/off. it worked fine for about a week, then i went to play a game last night and it would not shoot. no leaks.
how do i fix this.

[Alpha]

Does it click when you gas it up?

Sounds to me like your LX isn't set up right, since you have a new on/off. Oil up that on/off (a lot) and try.

Secondly, add one Level 10 shim into the powertube.

If that doesn't work, add one more shim.

IF that doesn't do the trick, Try switching up to one size higher carrier (they're marked by dots and lines). Dont use any shims

If that carrier doesn't work, add one shim. If that shim doesn't work, add one more.

[undescriptive]

you may have to increase the velocity to overcome the bolt stick...
but add a ton of oil....

in the power tube add a couple of drops, around the bolt stem, in the on/off and a a good 4 or 5 drops in the ASA before you gas it up :)

that should help!

[cdacda13]

i oiled like u said and it still wont shoot.

should the on/off have an o-ring on it cuz mine it all metal???the bottom part facing away from the valve.

[mag88888]

what level 10 spring are you using?

[cdacda13]

the one that is barly longer then the bolt.
i think the problem is that the bolt is sticking. how do i fix that?

[Alpha]

Put in a logner spring, or switch carriers, or add shims to the powertube, or increase air flow to teh marker, or increase velocity.

[cdacda13]

thanks guy i got it working. I had to put over a bottle of oil in it put i got it working. i had to change carriers and shims but it works. thanks too you guys.