ULT on classic valve.... and ULe body q's

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • blackhawk213v
    BURNED
    • Aug 2004
    • 51

    #1

    ULT on classic valve.... and ULe body q's

    That will work fine right? cuz Im getting the ULE trigger thing and lvl 10 for my mag with a regular classic mag. that will work ok right? And I also got a ULE Warp body. will that fit right on my stick rail? or whateve is the black bar inbetween the body and trigger frame?
  • stop whining buy a mag
    I know what I'm doing!
    • Sep 2004
    • 414

    #2
    The ULT will work but you will have to shim the heck out of it.

    The warp ULE bodies will only work if you cut a slot into your rail for the feedneck to come out.

    Comment

    • fred1
      Registered User
      • Oct 2003
      • 62

      #3
      yes, i did have a ULT on a classic worked for me..doesent work for some people take your time with it and it should work (you will probably need more shims then comes in the ULT package)
      1- 68 automag (CF 351XX) ULE, ULT, lvl 10
      2- 68 automag (CF 287XX) ANS bolt and on/off

      .:FRED:.

      Comment

      • undescriptive
        Battered and Bruised
        • Apr 2004
        • 279

        #4
        I did it, but you really need either VERY good trigger control or trigger stops

        I think I had 13 ULT shims in there (well I had a few LVL10 shims in there instead of all being ULTs!)

        Comment

        • blackhawk213v
          BURNED
          • Aug 2004
          • 51

          #5
          Originally posted by stop whining buy a mag
          The ULT will work but you will have to shim the heck out of it.

          The warp ULE bodies will only work if you cut a slot into your rail for the feedneck to come out.
          how much do you think it will cost to send all that crap into AGD to have it cut and shimmed and installed and everything?

          Comment

          • BeaverEater
            25thID - back in hawaii
            • Oct 2003
            • 1536

            #6
            i dont think they put them in classics but i could be wrong. When you buy your ULT kit, just pick up like 10 lvl10 shims. Also install trigger stops if you can, it works wonders.


            I just want this stuff gone, super low prices

            Comment

            • blackhawk213v
              BURNED
              • Aug 2004
              • 51

              #7
              well maybe i should clarify this. i have an electronic frame on my mag. the only reason im getting the ULT is becasue i need a new on/off assembly and this one was highly recommended

              Comment

              • undescriptive
                Battered and Bruised
                • Apr 2004
                • 279

                #8
                AHHHHHHHHHHhhhhhhhhhhh..........

                yes should work fine

                Comment

                • blackhawk213v
                  BURNED
                  • Aug 2004
                  • 51

                  #9
                  Originally posted by undescriptive
                  AHHHHHHHHHHhhhhhhhhhhh..........

                  yes should work fine
                  work fine with or without the million shims?

                  Comment

                  • undescriptive
                    Battered and Bruised
                    • Apr 2004
                    • 279

                    #10
                    you will still need a lot of shims to get it firing, BUT you won't suffer from the short stroking problem as much
                    but still order the 8-10 LVL10 shims to help you out!

                    Comment

                    • blackhawk213v
                      BURNED
                      • Aug 2004
                      • 51

                      #11
                      ok thanks alot for the help. i was gonna take it to paintball maxx to get everything installed after me and my next door neibor check everything out. Im pretty sure brad would have some shims. right? cuz im like 30 minutes from paintball maxx. Im pretty sure he could work things out and make them all good on my mag.

                      Comment

                      Working...