i need help fasttttt!!!

[pokemon90]

OK i have x-valve/lvl10/ult. now when i shoot my mag it shoots ok without paint but,it still doesnt always recock. then when i put paint in it it shoots okay for 10 or less shots then doesnt recock or sorta recocks really slow.

i have put shims in from 3-5 with the short spring and get this result^
if i put the red spring in with 5 or 4 shims it wont shoot at all.

what is the problem mabey i cant find the right combo of shim to spring???????

[D-Block]

If you're using an ASA with On/Off knob make sure you have the knob turned "on" pretty good. Sometimes On/Offs won't let a good flow of air through if you don't turn them enough.

[VFX_Fenix]

adjusting the velocity nut in about an eighth of a turn. I know that with my ULT the trigger wouldn't always reset propperly if the valve pressuer was too low.

[pokemon90]

alright i tried that stuff and i get sam thing

more help

[pokemon90]

comon i really neeed help i have a turny next weekend!!!!!!!!!!!!

[CaliMagFan]

tighten the field strip screw with an allen wrench... just tighter than hand tight will suffice...

[pokemon90]

thanks ill try that tomrrow but more suggetsions will help


how many shims do i need for the red spring???

[delanoapd]

i only have 2 shims in with the red spring....and the carrier with only 1 notch in it...i have 5 shims on my ULT...and this is a sweet setup...the trigger pull is only about 1/8" and it really is pretty sweet. the output pressure on my tank is 850psi. with the way i have that set-up, the level 10 bolt doesnt "chop" a straw...it is beautiful. hope this helps, any more questions feel free to ask

[pokemon90]

im not sure how to get the carrie ouy, causei can see it but i doesnt just fall out.
do i need to use like a dental pick thing?
or screw off something else?

oooo and do u mean one ring o one dot??

[gothsqwd]

You can use a dental pick, but you don't need one. I use the .050" or the 1/16" Allen wrench. anything that is small enough to get in there that has a bend. You could probably use a paperclip. Jus be careful not to damage the o-ring unless you want to replace it.

As to which carrier to use: use the largest one that doesn't leak.

[pokemon90]

ok i mest with carrers a little bit and then lubed it a ton (1/4 of a bottle) and it started shotting real good then i ran out of air. So i wont know if the problem is trulyy fixed till monday.thats when i can get my tank filled.
ill post to let u know how its shooting monday night.