velocity problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cdacda13
    WDP: Fly or Die
    • Jan 2005
    • 841

    #1

    velocity problem

    my 68 classic with level 10 is shooting at insane FPS. It was at 380 FPS and it was the lowest velocity i could get before it wood not work.. BTW I have the red spring it
    Last edited by cdacda13; 03-05-2005, 12:40 PM.
    Born to be hated
    Dying to be loved
  • 11_Mile_TMaster
    Registered User
    • Dec 2002
    • 230

    #2
    Originally posted by cdacda13
    my 68 classic with level 10 is shooting at insane FPS. It was at 380 FPS and it was the levelest velocity i could get. BTW I have the red spring it
    Try a different spring... either lighter or heavier. You might also want to try stepping up a carrier size (You will likely have to replace the carrier o-ring as well)
    Automag RT-Pro
    68 Classic
    BE 1999 Rainmaker
    PMI Trracer
    So many guns, So little time.

    Comment

    • athomas
      Of course it works-its AGD
      • Jan 2002
      • 8039

      #3
      Do you mean you can't turn it down? Or do you mean it stops firing if you turn the velocity below that value?

      If it doesn't go lower when you adjust it down, then the problem is a bad regulator seat o-ring. If it stops shooting when you turn the velocity down below that value, then you need to use a shorter bolt spring.
      Except for the Automag in front, its usually the man behind the equipment that counts.

      Comment

      • cartman11590
        Registered User
        • Apr 2004
        • 18

        #4
        wht spring are u using?
        aim- pbkilla123
        [email protected]
        http://www.directaffect.com/dev/jason/ao_states/images/ao_il.gif

        Comment

        • cdacda13
          WDP: Fly or Die
          • Jan 2005
          • 841

          #5
          the red spring
          Born to be hated
          Dying to be loved

          Comment

          Working...