Building a mag

[Dayspring]

You heard wrong. It was the ULT that didn't always play well with the classic valve. The Level 10 works with ANY AGD gun/valve.

[Tunaman]

60 new? Where? Only a moron would sell them for 60 new.

[68_IrOcKmAgS_68]

i'll try an get the site from my friend. i was at his house today and forgot the site. i''l post tomorrow.

[68_IrOcKmAgS_68]

i want to put a chrome foregrip on my gun but i'm not sure what kind to use a gas thru or what, and if i decide to put a gas thru or whatever on it, what do i need to attach it. and if anyone has the parts i need in chrome post o pm and i'll buy. (probably w/in reason)



pics would be appreciated!!

[kurama]

You will need a:
Rail Assembly (Rail, bushing, Twistlock assembly, sear pin)
Body
Valve Assembly (Bolt, Spring, Regulator, On/Off Assembly, Bolt spacer, Valve, etc)
Barrel (Most bodies use twistlocks. Some Emag bodies and all ULE/Sluggo bodies use cocker threads)
Trigger frame (Trigger, Trigger Pin, Grips, Safety)
Sear Assembly (Sear, Sear Pin)
Automag Foregrip or Automag ASA Adaptor + Gas-Thru Grip
Quick-Strip Thumbscrew
Front trigger-Frame screw
Bottomline ASA
Air hosing/Fittings
Air or co2 tank.

Anno kits usually cost more than the anno would itself. And its hard to anno and somewhat unsafe. An anno kit will run $150 and up, plus the cost of an electrical source. You can get an anno done at http://www.atmf.com/ for very cheap ($45 for single color, $110 for splash, etc) and they do a great job. Doc Nickel and Bob Long do their annos through them, and I've recommended them to several people and I'm considering an anno soon. I've seen a few in person, and they looked great.

[jewie27]

The Level 10 works with ANY AGD gun/valve.

Not true. Level 10 doesn't work on Sydarms and field rental Automags.

[68_IrOcKmAgS_68]

at pbgear.com LXs go for $68

[Mr. Mouse]

you'll need
-body of some sort
-rail
-sear
-trigger
-field strip screw
-front screw
-valve
-macro/steel braided line
-macro/steel elbows
-duckbill, or on/off
-elbow if the body is p/f, i recommend rouges ULE body package with adjust feedneck
-barrel(cocker threads)
thats just for it to work

optional(if you want a foregrip of somesort)
-asa screw
-asa
-gas thru or reg
-extra elbows/fittings
-extra macro/steel hose line

good luck, im almost done building mine, ill get pic's up when its finally done =)

[68_IrOcKmAgS_68]

-Chrome pf left body
-Chrome rail
-sear
-Chrome trigger
-field strip screw
-front screw
-valve
-steel braided line
-steel elbows
-on/off
-Hopper
-an elbow

and i want an asa + asa screw and a chrome gas through grip. if you have what i need please post, an if ya have pics send them to [email protected]

THANKS

[68_IrOcKmAgS_68]

Help!!!!!!!!!

ok, i got everything and am putting it togther, so far so good. then i relized i need a pin that holds the sear assembly in place. i thought i had the right one but, i need a half-cricle shape sear lock pin to fit my rail. so i put an allen wrench in it to hold it in place temporrarily, got it all hooked up, then put on the gas and guess what LEAK, i though it was from the make-shift sear pin lock, but it turms out that it was coming from the inside of the bolt. so if you can help please post!!!

[68_IrOcKmAgS_68]

So Close!!!!!

ok, i just bought the sear off the guy who sold me my rail, so that prob should be taken care of, no there's just one more thing. i bought a Taso x-chamber, but i relize now that i need an asa gas thru foregrip adaptor so i can use my new taso x-chamber. if you have one of these, i need it in chrome, so please post if you have a chrome one.
i'm so close to building my first mag!!!!! thanks!!!