I have an almost brand new Automag ULE Custom with an X-valve and a double trigger. When I gas the gun up it leaks air at about 100-200psi per 5 minutes. I tried different combinations of 0,1,or 2 washers in front of a 1.0 brass fitting in the bolt but none of them seemed to do much. What should I do? I have been shooting oil through the gun on a fairly reguar basis.
-
-
try
take the bolt out and try a few different carrriers slide them one at a time on the bolt shaft
back and forth .. find one that isnt to snug or too loose ..
air it up without a washer .. if there is a leak try one washer..
you might need to add a second one ..
and what spring are you useing .. -
I have the biggest spring in right now, the silver one. However, regarless of the spring it still continues to leak. I'm going to try changing the 1.0 out for a 1.5 like you said to see if that will work.Comment
-
No. You have it backwards. Go with the .5 carrier using the same oring from the 1.0 carrier that is in there now. Take out all the shims. Let us know.
Comment
-
Yea, if it leaks you want a smaller carrier. If it won't shoot (sticks) you want a larger carrier.Comment
Comment