Walkin

[amagrtpro]

Ive been watching some movies on mags and it looks like they are walking theirs.
do i need any thing to do this

I have a lvl 10, x valve, y frame, magnetic ball detent, ULE trigger pull kit, And a ULE body

[AUTOTACULAR]

just swish your fingers back and forth against the trigger and rip...might be kinda hard on the mag tho, works well on ma angel

[amagrtpro]

my trigger pull is to hard to walk

[fuzzy_cheesecake]

practise walking your trigger with a pen or something. Tie an elastic band to something sturdy, then tie it to your fingers. Use the elastisity of the rubber to make your fingers stronger.

[tipp-ed off]

The easiest way, for me, to walk a Mag with ULT is with trigger stops. Otherwise its very difficult.

[amagrtpro]

what are trigger stops?


my fingers are fine ive been practicing for over a year


i want to no how i can make my mag walkable

my trigger pull is rock hard

[warbeak2099]

I have the same setup in as much as I have the xvalve, ult, lvl 10. I also have a Logic frame with trigger stops. What I did was add on a bunch of shims to the ult and adjust my stops. I can walk it for around 5-6 shots. With an adjustable tank cranked up to around 1000psi it would be much easier. I have an 850psi preset.

[temilotzin]

Put as many shims as you can fit on your ULT (usually about 5-7) and your gun will rip even with a preset tank.

[amagrtpro]

wheres the ULT im an idiot about my gun

[Skywalker]

wheres the ULT im an idiot about my gun

It's on the underside of your valve. Little square lookin' thing with a pin in the middle.

[txaggie08]

mine doesnt kick back out to walk effectivley. i can however fan with one finger VERY easily now