Is it possible to chop with a lv 10?
-
-
yes ive done it before. if ur tank has low psi like 1000 or less and u r using crappy paint then u can easily chop. -
chopping is always a possibility. make sure its tuned right, and you will almost never get a chop.Remember, nitrogen hits harder!
Originally posted by minimag03Comment
-
over 1 year...shot 15+ cases with my ULE Custom...not a single chop...lvl 10 is freakin amazing
Comment
-
I concur with what insixdays777 said, almost a year since I got my Lvl 10 really working and not a break in 10+ cases as long as the pressure is high enough. Around 800 psi it falls apart pretty quick and all bets are off but I can't blame Lvl 10 for that. Properly setup paint chopping is a thing of the past.Automag, Level 10 Upgrade, Intelliframe, Extended Power Feed, ANS PhaseII Regulator body, Smart Parts 14" All American, ACI Bulldog HPA, 12V Revolution, and lots of paint!Comment
-
Yes of course it is possible to chop with a LX. Fortunately, I have never done so with my ULE mech mag b/c Tuna is the MAN at tuning markers. I've even done that trick where you put tape around a paintball and put it in the breach and fire. The LX works like a charm everytime.
However sometimes with my X-Mag I double feed, but that is a detent issue, not LX.Dust Green X-Mag #315
ULE body w/ dual Kila V2 detents, X valve w/ LX, Y-grip w/ Dye grips, ULT, Omega rail, Stainless Steel Freak Kit.
My Feedback- http://www.automags.org/forums/showthread.php?t=165428Comment
Comment