Power Feed for Automag RT

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Johnny_Bravo02
    Paintball for 5 years
    • Jan 2002
    • 44

    #1

    Power Feed for Automag RT

    I heard that AGD is replaceing the feed tube on the gun for free and putting on the power feeder.
    Is this true? If so, where do I send my gun?
    Johnny
    If you hear a swish, and you look left and right, but you see no one. Then, all the sudden, a bright splash hits you right between the eyes, You'll know one thing for sure. YOU WERE JUST ICED BY THE ICEMAN.
  • Magsrule3
    VW Powered
    • Jun 2001
    • 1081

    #2
    What? Could you be a little more clear? Rt's have always cam with either powerfeed or vertical feed.
    "I may be half human, but Im all Woman"

    Retro PF Mag
    Lvl 10
    Intelliframe
    DYE 12" aluminum'
    KAPP foregrip
    68/3k Flatline
    KAPP DZ2

    1987 VW Scirocco 16v

    GOOD TRADERS: Alf, Snakestang
    BAD: iNeedaN2tank!

    Comment

    • Xzion
      Official Dragon of AO
      • Jan 2001
      • 1617

      #3
      'Power Feeder'? Might you be referring to the Warp Feed?

      View My Mags

      "Think First, Think Fast, Be Careful, Pursue. Be Great."

      Comment

      • Johnny_Bravo02
        Paintball for 5 years
        • Jan 2002
        • 44

        #4
        Don't know

        Its what ever comes stock. I quess it is the feed they tested in england that went over well there. I am not sure. Its not the RT pro. I know the RT Pro has a different feed and I heard someone say that AGD will replace the old feed with the new one on the RT Pro. Does anyone know?
        Thanks
        Bravo
        If you hear a swish, and you look left and right, but you see no one. Then, all the sudden, a bright splash hits you right between the eyes, You'll know one thing for sure. YOU WERE JUST ICED BY THE ICEMAN.

        Comment

        • MajorDamage
          King of Polyester!
          • Dec 2000
          • 3141

          #5
          AGD replaced the old powerfeed that was angled with a standard powerfeed body. I think thats what you are reffering to.

          ENDO!
          Oldskool

          Comment

          • Xzion
            Official Dragon of AO
            • Jan 2001
            • 1617

            #6
            High Rise Powerfeed

            the classic RTs uscome with the angled and raised 'High Rise Powerfeed' but in north america it orignially came out with a few flaws, which put a bad taste in peoples mouth, so when the fixed the problem, nobody bought them, which is why all north american powerfeeds are the 'standard' style.

            Whereas in europe, the high rise powerfeeds worked right out of the gate, so no bad taste was left and people loved them. thats how I understand it at least.

            View My Mags

            "Think First, Think Fast, Be Careful, Pursue. Be Great."

            Comment

            • Johnny_Bravo02
              Paintball for 5 years
              • Jan 2002
              • 44

              #7
              Mine Has.......

              It looks like the classic automag power feed. Is that the good one?
              If you hear a swish, and you look left and right, but you see no one. Then, all the sudden, a bright splash hits you right between the eyes, You'll know one thing for sure. YOU WERE JUST ICED BY THE ICEMAN.

              Comment

              • Xzion
                Official Dragon of AO
                • Jan 2001
                • 1617

                #8
                both are good, the high rise just let you sight down the top of the mainbody better, and both work just as well as the other, its just that the inital run of the high rise powerfeeds in north america were defective and didnt work properly, which put a bad taste in players mouths, and prompted them not to buy the correctly made and functioning high rise powerfeeds.

                View My Mags

                "Think First, Think Fast, Be Careful, Pursue. Be Great."

                Comment

                • Mossman
                  habitual line stepper
                  • Oct 2001
                  • 3751

                  #9
                  shoot...i have a high rise angled PF whatever you wanna call it, assuming my gun is from america, and its very early in the production, SN is RT 00069.
                  does mine have ISSUES??? seems fine to me
                  My Feedback

                  "Game...Blouses"

                  Comment

                  • Xzion
                    Official Dragon of AO
                    • Jan 2001
                    • 1617

                    #10
                    it -might- have issues... Im not sure when they started 'fixing' the high rise powerfeeds, though I am pretty sure there was a flaw with them in north america at one point....

                    View My Mags

                    "Think First, Think Fast, Be Careful, Pursue. Be Great."

                    Comment

                    • FooTemps
                      HURRRR
                      • Sep 2001
                      • 6702

                      #11
                      Originally posted by Mossman
                      shoot...i have a high rise angled PF whatever you wanna call it, assuming my gun is from america, and its very early in the production, SN is RT 00069.
                      does mine have ISSUES??? seems fine to me
                      Well, if it seems to be working fine I doubt it was one of the high-rise power feeds that had issues. It's sorta like the superbolt issue. Some broke and some didn't.

                      .
                      Good Traders:
                      Tunaman, K-villeplayer, Magman007, Mastersconi, Jon/xpm, Kenndogg

                      My feedback if you've dealt with me, leave some...

                      Fruitcat: it's what AO doesn't like.

                      Comment

                      • manike
                        INCEPTIONDESIGNS.COM

                        • Jan 2001
                        • 3820

                        #12
                        Mossman,

                        Some of the early ones weren't aligned as well as they could have been. That is what caused issues. If your gun functions OK then it has no issues and is fine as it is. I would not change it. You have a collectors piece. Nice SN :)

                        manike
                        Inception Designs - My new company where Innovation is the Inspiration

                        Comment

                        • Johnny_Bravo02
                          Paintball for 5 years
                          • Jan 2002
                          • 44

                          #13
                          Well Thanks guys!!

                          My gun will be here tomorrow. I think it will be just fine. I appreciate all you guys answering me.
                          Thanks
                          Bravo
                          If you hear a swish, and you look left and right, but you see no one. Then, all the sudden, a bright splash hits you right between the eyes, You'll know one thing for sure. YOU WERE JUST ICED BY THE ICEMAN.

                          Comment

                          Working...