Classic Valve "Chuffing"

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mobsterboy
    Mr.StealYoDallara

    • Aug 2004
    • 2371

    #1

    Classic Valve "Chuffing"

    classic valve is "chuffing" as they call it
    Air it up and it shoots out air through the bolt
    pull the trigger and it sounds like its shooting fast but not hard,
    YES: Im using co2
    NO: No x chamber yet
    Its got a venturi bolt on it
    I'm going to oil it up and try again, but i don't have air so it will have to wait till tomorrow at least
    Any Ideas
    RAWR
    Dallara Den
  • athomas
    Of course it works-its AGD
    • Jan 2002
    • 8039

    #2
    Perform the level 7 basic check. Hold the trigger. If it leaks out the front of the gun and sounds like a lawn sprinkler, then the on-off top o-ring is bad. If it doesn't leak at all, then check/replace the powertube o-ring. If it still leaks, use a shorter powertube spacer. Chuffing at this point is usually caused by a weak bolt spring.
    Except for the Automag in front, its usually the man behind the equipment that counts.

    Comment

    • mobsterboy
      Mr.StealYoDallara

      • Aug 2004
      • 2371

      #3
      yeah, it sounded like a lawn sprinkler, so replace the top oring?
      RAWR
      Dallara Den

      Comment

      • athomas
        Of course it works-its AGD
        • Jan 2002
        • 8039

        #4
        Yes, replace the small white top o-ring on the on-off assembly.
        Except for the Automag in front, its usually the man behind the equipment that counts.

        Comment

        Working...