is it possible to use a regular bolt on an x valve instead of the level 10? the reason i ask, is im not too fond of foamies and i have a titanium bolt that shoots super fast (i bought it like 7 years ago at a world cup)
-
-
Yeah sure it is, you just have to change the powertube internals.Dust Green X-Mag #315
ULE body w/ dual Kila V2 detents, X valve w/ LX, Y-grip w/ Dye grips, ULT, Omega rail, Stainless Steel Freak Kit.
My Feedback- http://www.automags.org/forums/showthread.php?t=165428 -
yeah, the fronts of the valves are shaped the same, except you will most likely chop more wiith a lvl 7 bolt, especially with the x-valve
Comment
-
remove all that is involved with the lvl 10 ie shims and power tube spacer and replace it with a new power tube spacer im not sure if you need to replace the tip as well but probably not!
fyi no you can not swap bolts and have lvl 10 effectsVV04962 yeah thats my Pewter CnC X-mag
Looking for a milled 04 featherlight viking!!!
my feedback!!!http://www.automags.org/forums/showt...84#post1584884Comment
-
cool thanks. i like the idea behind the level 10 and all, i just wish they made a foamiless bolt for it. id rather break a couple more balls than shoot a foamie out at the start of a game. thats why god made squeegeesComment
-
The level 10 bolt works fine without foamies. The opening in the front without the foamie is the same as a lot of bolts in stock form.Except for the Automag in front, its usually the man behind the equipment that counts.Comment
-
If you go back to the old bolt, it obviously won't be anti-chop. I assume you have a X-Mag with eyes.
Comment
Comment