HALO Cleaning

[Restola]

My level 10 emag chopped some terrible paint, and now my halo has paint in it.

Anyone have a link to a guide on disassembling and cleaning a HALO B (with rip drive)

[RRfireblade]

It's not as bad as it seems.

Unscrew everything, remove the batt door and pull the halves apart.

The critical point is to make sure the PC board and the on/off button plate stay together in one side(Left side seems to be the best side).If not you will likely break off the on/off button itself. Besides that,keep an eye out for the lid spring and pin.

Onces it's seperated the rest all comes apart as it apears.

Put it back the reverse way making sure to put the PC board and the on/off button plate in together and into the grooves in the body halves,the little lid sprig goes in,then the lid pin and lid and then the rest.Route the battery cable thru the slot in the body and that's pretty much it.