E-mag or not

[anders]

I have had an R/t pro now for about one year. I realy like this marker but i have been wondering if i could convert my r/t to an E-mag. If you can help it would be very aprieated
sorry i cant spell

[TMAXXKING1]

yes

yes you can you will need lowers and you could even use your rt rail you have now ..

as long as it is a newer rt and not the old style bango bolt rt

and you will also need the emag on/off pin it is a little longer then an rt pro pin..

[anders]

bad *** could you take a guess at how much it cost

[gothsqwd]

you can get emag lowers from Tunaman at his website for $450 (I think) or so.

WWW.tunamart.com

[tonybhall]

Hey Anders,

I was asking this same question a little over a year ago. At the time there were just 2 ways to do that. Buy the E-Mag lower or get a Devil Mag. At the time the EMag Lowers were selling for around $500 and the Devil Mag conversion was around $550. Both of those are great if you can afford them.

At the time, I could not, so a friend of mine and I did this instead: http://www.pbnation.com/showthread.p...hreadid=696650

If you're handy and have the right tools, it's not that hard to do. And depending on how you get the parts (new or used) and what ups you go with, you can do this mod yourself for between $150 to $200.

[atm743]

you can get a good set of lowers with the battery, charger, and all of the internals like the selinoid and the circet board. with 3.2

its will be around 350-450 no more than 450 though

then you will need to get a new on/off assy here in think link

it has different o-rings and also has a longer on off pin

and then your set

heres the link

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=205&categoryID=24