Hey.. I have an automag classic and Im having troubles with my gun. It just doesnt sound right when Im firing the gun. Say I pull the trigger and when I release it has a weird metal click to it. I hear it even better when I release the trigger slowly. There is a spacer kit there but that sound is still there no matter what spacer I use and Im also using the intelliframe. What Im guessing is that the sear doesnt catch the lip of the both properly. If so, how would I be able to fix this problem? Is the trigger rod suppose to be adjustable? I havent really put real force into it but it doesnt seem to move. What is air gap? Sigh...so frustrating when no one where I live knows jack about mags.
-
-
Trigger rod is red loctitetd in place, and to move it you need to heat it with a butane lighter or something similar, and use alot of force.
You don't need to do that though. The metal click is probably normal, just the sound of the bolt catching the sear, and smacking into the bumper.
-
The trigger rod is technically adjustable, but there is no reason to adjust it using the stock frame or the intelliframe. Perhaps it was adjusted before. In that case you may have some premature wear on your bolt and/or sear already and you may want to consider replacing them with a new one from AGD.
The "Air gap" is just the idea that when your mag is all gassed up if you push the trigger towards the *front* of the gun, the trigger rod should not touch the trigger. If this gap is not there then your trigger rod has been adjusted.
Comment
Comment