I was wondering if you can use a Q-Loader with a minimag... I've been considering getting one because I think that the warpfeed systems are too awkward... Any insight?
-
-
I used one on my ole ULE hypermag and it worked great. It would work just as good on a minimag. I mounted mine under the barrel (connected to the vert asa). -
<a href="http://www.jayloo.com/files/pics/6000/Dscn12624899.jpg"> <img src="http://www.jayloo.com/files/pics/6000/Dscn12624899_rs.jpg" width="800" height="600"> </img></a>
works for me, and i have run it with the mini body, just make sure you use the elbow that comes with it, if the ball path isn't smooth it will slow or stop the flow of balls.GearAGD - "[/tom kaye shakes head in disbelief]"
RT Mag / Minimag / Pump Mag / Sydarm / ULT / Qloader / ELCD / RPG / 1989 Sterling / 2x F2 illustrator
Feed Back HereComment
-
sweet... thanks a lot guys...Comment
-
Qloaders
I use Q-loaders exclusively and love'em. The only thing I use my Halo for is to load theQ-loader pods.
As you can see ..........Last edited by Loguzzzzzz; 04-18-2005, 04:14 PM.......You know you want one!!Comment
-
can you mount the q loader directly on the feed tube of a ule warp body? how about a pf body?"Don't stoned i'm shoot" -someoneiforgetComment
-
im getting one for my mag :)
my ao feedback http://www.automags.org/forums/showthread.php?t=167490Comment
-
It can be done
You can use a 3/4" "CPVC" coupling (not "PVC" there is a defference). The coupling will fit directly on the warp adapter and slip into the q-loader mount. This is for the ULE body the coupling will slip directly onto the powerfeed body.Originally posted by onedude36
I will go take a picture and post it to show how it will look. I have set up many friends guns this way already. It works sweeeeeet
......You know you want one!!Comment
-
heres a couple more pics if u want em. I put the qloader right above my hpa tank and it makes a nice little "nook" for my shoulder there. completely comfortable, and no profile as seen in the first pic. sorry i had my barrel cover on, but safety first...
setup: black emag, xvalve, lvl10, 3.2 software, qloader w/ cms, nitro duck X-stream tank(only in that pic, i hated that tank, i sent it back to xpaintball.com, i just bought an AGD flatline from Tunaman. AGD pride baby!)
heres a link if the pics dont show up, im not 100% sure i got em attached...
http://img100.exs.cx/gal.php?g=imag00579jw.jpgLast edited by jenarelJAM; 04-18-2005, 09:31 PM.you know you play this game too much when the neighbors stop fixing their broken windows...
:shooting: :cuss:Comment
-
Some pics
As promised in my earlier post, here are some pics showing the direct mounting I have used in the past.......You know you want one!!Comment
Comment