hypermag help

[onedude36]

Yes I posted this in pbtalk, but people are ignoring me, making me very sad

Ok, my hyperframed mag is chuffing when I fire fast. I have a hyperframe, 20bps board, ult w/ four shims(was at three), lvl 7 in right now, have lvl 10 on hand w/ one shim. when i fire with one finger, it works, when I walk it, it chuffs every other shot. I have an armageddon turned up with a full tank. Any ideas? it did this with the lvl 10 with 1 and 2 shims with gold spring.

[kevdupuis]

What type of mag is it, Classic / RT Pro/ ULE Pro. The ult could be sticking slightly, requiring more tuning or lubing.

[onedude36]

Sorry, I have ule body, some kind of detent(delrin), x valve, hyperframe, ult, lvl 10 but i'm using a lvl7 now to eliminate variables.

[undescriptive]

do you have a useable mech trigger frame?

if you do, then tune the ULT with that first (may need more shims in the ULT)
then put the hyperframe on AFTER you are happy that the ULT is doing it's job properly....

you might also want to check the valve and the lines for obstructions - it happens occasionally :)

[onedude36]

used the mech trigger, slow occasional leak, not big deal. Works well. Nothing in the lines.

[undescriptive]

shouldn't be leaking at all!

get that fixed and possibly another shim or 2 in the ULT and you should be set to go