RT Pro Valve on Classic Rail?

[9868Classic]

In looking at my RT Pro Valve that I received the other day, I noticed the seer is square compared to the circle that my stock classic valve is. Can I still use this on a classic rail? Or do I have to switch to an RT Rail?

[Dayspring]

Sear or on/off assembly?

[9868Classic]

I guess the better question would be.

Can I use an RT Pro valve with a Classic rail and sear?

[Dayspring]

Yes. You just need the appropriate on/off pin length.

You will need a .750" on/off pin. The RT Pro used a .765". Too long for the rail you have.

[9868Classic]

Where would I find a .750" pin? I checked airgun.com but didn't see anything.

[brikar]

Someone double check this for me to make sure its what he needs but this is the on/off pin for the classic valve.

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=24&categoryID=18

[Dayspring]

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=399&categoryID=23

Or PM Tunaman. I recommend Tuna. www.tunamart.com

[9868Classic]

Thanks for the help guys. Sent Tuna a PM.