deadlywind problem

[two_four_878]

I'm having trouble putting a karta body on my RT ULE.

The damn sear assembly won't fit. I'm useing the ULE rail supplies by deadlywind. What am I doing wrong. I'm new to mags and am getting confused quite easily.

[warbeak2099]

What body/rail combo is it? If it's a Karta then it should work with the RT sear. If it's a Dallara, then no it won't work with the RT sear. Dallara rails take the Classic style sears, not the RT's.

[two_four_878]

I ordered a Karta body with rail. I thought that meant I was getting a karta rail but the spot where the sear should go is too small.

[TMAXXKING1]

sear

sear .. do you have a classic sear .. instead of an rt pro style sear...

just asking maybe you had a classic rail ... on your old gun... that your useing parts from.

[ICP]

just to explain (sorry if you know) is your sear pin short or is it long and threaded on one end?

[two_four_878]

Long and threaded.

[TMAXXKING1]

links

here are some links pick the one you have ,,

http://store.airgun.com/index.cfm?fu...&categoryID=95 rt pro what you need

http://store.airgun.com/index.cfm?fu...&categoryID=92 classic what you dont want to have

on your old rail set up did you have a pin under the body ..

or did you have an allen key on the side to take it out ..

[two_four_878]

I have the RT pro sear. I'd take a pic but I don't have my camera handy at the moment. There isn't a hole for the axle pin either, how am I supposed to hold the sear assembly in?

[two_four_878]

Well, I'll just buy another sear and try it out. I'm not too concerned about fixing it quick, I have plenty of other markers to use in the meantime. Thanks a lot guys.