Details

[Taylock]

okay, im new to mags i have a 68Automag, i understand how they work, but i would like to know more. so here it go's

#1. exactaly how much psi/ci dose the mag take to fire 1 shot? by that i mean how much air/Co2 is in the gun when its operating?
#2. do 45 degree dye sticky grips fit the stock grip frame?
#3. the volcity is adjusted on the back half of the A.I.R valve right?
#4. i make my own barrels, where can i find detents for them?

and #5 is not about mags, a few years ago brass barrels where the thing to have, dose anyone remember why? i read somehting about them once but cant remember.


thanks for any help you can offer,

Sincerley a Paintball addidict


"Proper tactics will allow a few to accomplish much,
Improper tactics will allow mank to do little...." -Sun Tzu

[Dayspring]

1)The gun requires 600+psi to operate. That is regulated down to 450psi in the air chamber. The ball receives 65psi. At less than 800psi input, the gun has problems.

2) No.

3)Yes.

4) Depends. Are you using a twist lock body or ULE body?

okay, im new to mags i have a 68Automag, i understand how they work, but i would like to know more. so here it go's

#1. exactaly how much psi/ci dose the mag take to fire 1 shot? by that i mean how much air/Co2 is in the gun when its operating?
#2. do 45 degree dye sticky grips fit the stock grip frame?
#3. the volcity is adjusted on the back half of the A.I.R valve right?
#4. i make my own barrels, where can i find detents for them?

and #5 is not about mags, a few years ago brass barrels where the thing to have, dose anyone remember why? i read somehting about them once but cant remember.


thanks for any help you can offer,

Sincerley a Paintball addidict


"Proper tactics will allow a few to accomplish much,
Improper tactics will allow mank to do little...." -Sun Tzu

[Arstron]

As for the brass barrels, look at this site:

http://www.directpaintball.com/article_paintball-gun-barrel.html

[Taylock]

im using the twist lock type barrels. and thanks for the info

[Arstron]

Here is the twist lock ball detents, they mount on the barrel:

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=2&categoryID=90

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=180&categoryID=90