AGD ACE - need wiring advice

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • MindJob
    #1

    AGD ACE - need wiring advice

    Ok, need some of the crack technical minds here on AO to help me out with this one.

    I just put a Predator Morlock into an old ANGEL LED, and the thing rocks.

    I have been planning out my Xmag and e-tac for sometime. I have most of it figured out. The etac I will install the break beam eyes..

    On the xmag, I have to use the ace.

    Here is the problem. The AGD ACE has 2 wires that run off of it. One marked 5v and one SIG. I need to wire it to the morlock board, which has 4 wires. (2 for the emmitter eye and 2 for the detector eye)

    Anyone have any idea how I can translate the wiring without having to bypass the ace circuit board?
    Tags: None
    • Duck Hunt
      Spam
      • Oct 2003
      • 434
      #2
      Contact Curt at KM2, www.exarin.com, he'll be able to help.

      Sean

      AGD Did someone call me?

      You should go to each gun manufacturers forum or call them up. Ask the OWNER of the company why his gun is better. When you get your answers come back here and tell us what they said.

      You should buy my gun because I have 5000 posts that say I care.

      AGD
      ----

        Comment

        • BigEvil
          www.BigEvilOnline.com

          • Feb 2005
          • 9333
          #3
          Originally posted by Duck Hunt
          Contact Curt at KM2, www.exarin.com, he'll be able to help.

          Sean

          Good idea. I sent him an email.

          Have you had any dealings with him before?

            Comment

            • Duck Hunt
              Spam
              • Oct 2003
              • 434
              #4
              Yeah, he designed the Morlock boards, hes a nice guy. He'll be able to answer your questions I'm sure, also...

              Head over to Docsmachine.com and go to the Guild Forum, he posts there quite a bit AND hes working on a new board for the HALO.

              Sean

              AGD Did someone call me?

              You should go to each gun manufacturers forum or call them up. Ask the OWNER of the company why his gun is better. When you get your answers come back here and tell us what they said.

              You should buy my gun because I have 5000 posts that say I care.

              AGD
              ----

                Comment

                • BigEvil
                  www.BigEvilOnline.com

                  • Feb 2005
                  • 9333
                  #5
                  Originally posted by Duck Hunt
                  Yeah, he designed the Morlock boards, hes a nice guy. He'll be able to answer your questions I'm sure, also...

                  Head over to Docsmachine.com and go to the Guild Forum, he posts there quite a bit AND hes working on a new board for the HALO.

                  Sean
                  NICE.

                  I just got a couple of emails from Curt. Hes a HUGE help.

                  Thanks again.

                    Comment

                    • Banshee23
                      Lets Go Yankees!!!!
                      • May 2003
                      • 994
                      #6
                      Originally posted by BigEvil
                      NICE.

                      I just got a couple of emails from Curt. Hes a HUGE help.

                      Thanks again.
                      What did he suggest to do? I've tried wiring mine a few different ways so far & none of them work to my liking
                      MY TRADER FEEDBACK (<--- click here)


                      Maroon/Black Karta ULE Emag w/Predator board :)
                      Red/Black Acid Wash Edge milled Excalibur

                        Comment

                        • BigEvil
                          www.BigEvilOnline.com

                          • Feb 2005
                          • 9333
                          #7
                          Originally posted by Banshee23
                          What did he suggest to do? I've tried wiring mine a few different ways so far & none of them work to my liking

                          > > There has to be a ground somewhere. Is it grounded to the frame of
                          > > the gun?
                          > > It takes three wires to run an eye, minimum- +v, ground, and sig.
                          > >
                          > > In any case, you can just run the signal into the morlock's eye
                          > > signal pin,
                          > > and the +5 from the morlocks sensor-drive should also be used.
                          > > Basically
                          > > hook the two wires up to the two normally used for the detector and
                          > > you'll
                          > > be fine. Second make sure you have a ground path, any black wire on
                          > > the
                          > > morlock is ground.
                          > >
                          > > -Curt

                          > And yes, the board is grounded to the frame of the gun. So what you
                          are
                          > saying is to take one of the unused eye wires (the black one) and
                          > ground it?

                          Let me know how you made out. I have an E-tac im going to put the Pred Morlock into, but im still debating the xmag.

                            Comment

                            Previous template Next
                            Working...