new emag owner

[grominou69]

i recently bought a brand new emag (yesterday ) and found that the instructions are the same as the ol' one ... like 1.XX software ....
i want to know .... what are the specs of the 3.2 software ??
how many bps ?
is there a cap on bps?
modes (semi , full , burst )
and how long we need to charge the battery the first time ?

i also heard about a microswitch mod instead of the lil yellow pin ... did this mod voids the waranty ?? if not is it easy to do ??



theses are the info i cant get from my users manual so i hope i will find the answers here ...

[MonsterMag]

AGD 3.2
TS (total shots)
BPS 8-20 adjustable
Shot buffering (Leave it on 4)
Trigger On/Off ( lets you adjust leng of trigger pull)
There is good info here http://www.havoc-online.com/11699.html

I wanna know about the switch to , I h8 the pin

[grominou69]

yeah welll thanx but that's not helping me much ... the instructions to change modes are wrong ..
so here's what i have .....
if sum1 can explain me in detail what it's for and how it affect the shooting it will be apreciated ...

on menu
ts (well i know its total shots )
sps (must be shots per second ... )
ace ??????????????? (it moves from 0 , 1 or 2 )
shbf ?? (must be the shot buffering but how works the adjustment from 4 to 100)
trg ??? (its said off ??? what this setup is for ??)
and finally how can i change fire mode from semi to 3 shot or 6 shot burst ??
can we change the travel of the trigger ?? i didnt found any trigger stops ...
is sum1 on earth ever saw a blade trigger for the emag .... the only thing i really dislikes (hate) is a 2 groove trigger ...

i'm really confused but agd is not very helpful with their 2 sheets outdated instructions ....
and btw i love that emag

[AGDlover]

trg ??? (its said off ??? what this setup is for ??)

heh get it to that mode and pull your trigger

[Spacemanvic]

I hope someone answers

I posted the same ? a week ago, no one answered.

The two finger trigger doesnt bother me much. Whats the diff between the two styles?

yeah welll thanx but that's not helping me much ... the instructions to change modes are wrong ..
so here's what i have .....
if sum1 can explain me in detail what it's for and how it affect the shooting it will be apreciated ...

on menu
ts (well i know its total shots )
sps (must be shots per second ... )
ace ??????????????? (it moves from 0 , 1 or 2 )
shbf ?? (must be the shot buffering but how works the adjustment from 4 to 100)
trg ??? (its said off ??? what this setup is for ??)
and finally how can i change fire mode from semi to 3 shot or 6 shot burst ??
can we change the travel of the trigger ?? i didnt found any trigger stops ...
is sum1 on earth ever saw a blade trigger for the emag .... the only thing i really dislikes (hate) is a 2 groove trigger ...

i'm really confused but agd is not very helpful with their 2 sheets outdated instructions ....
and btw i love that emag

[MonsterMag]

Leave ace on 0
Shot buff on 4
And look in dealers section , rr makes fireblades
3.2 in semi only , no auto or bursts

[grominou69]

Leave ace on 0
Shot buff on 4
And look in dealers section , rr makes fireblades
3.2 in semi only , no auto or bursts

ahhhhh that sucks there is no other miodes than semi .... what is the jumper for if theres no other mode ?? should i put the board to trash and buy a mini morlock ??

[grominou69]

and who the hell is RR ?? cant find any thread on him ?
and about the trigger stops sum1 can tell me if there is an adjustment ??

[jenarelJAM]

http://www.logicpaintball.com/cgi-bin/mivavm?Merchant2/merchant.mvc+Screen=PROD&Store_Code=LP&Product_Code=FireBlade&Category_Code=LP

basicly the only place to get blade triggers for your emag/xmag

the 3.2 software is low on features, but high on quality. the shot buffering(shbf) is nice if left on 4, but you can adjust it if you want to (dont know why though...) the software is the same as is used in xmags, and since an eye isnt connected in emags, the ACE does nothing. leave it wherever... sps is shots per second, it just lets you adjust the max rof that the board will cycle at in e-mode/hybrid.

as far as the trigger off/on thing goes, it is used for adjusting your trigger pull, and magnet length. basicly, when you adjsut your trigger pull, you then have to adjust where the hall sensor "detects" your trigger magnet by moving it forward and back, the trigger on/off feature is nice because you can check to make sure your trigger is on at the end of the pull, bu off at the beginning of the pull. it basicly just tells you if the sensor is detecting the trigger, which would cause a shot in any other mode, but doesnt in trigger on/off mode.

[grominou69]

and about the on/off switch mod ?? sum1 know any about it ?

[Counterfeit_Syn5304]

If you get a morlock board I call dibs on your board....the on/off switch was just a old revy on off switch that was put inbetweeen the power wire from battery pack to the board. Just do a search on Fireblade Triggers and I'm sure you will hunt down RRFireblade. Yes there is no ACE on the emags unless you modify the rail for the eye to go through for ACE...Plus, you need an ACE board....very hard to find nowdays! I wish I could repair the ones that I have...I have around 4...but they look pretty beat upa and I know if anyone can repair them. RRFireblade, I think thats his name, has a thread where you can buy his fireblade triggers for around $39 plus shipping compared to the $53 plus shipping on the logic website.

[grominou69]

thanx a lot .... mp sent .... i hope he reads his messages ....