Weird e-mag problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • feildsweeper13
    Ace
    • Jan 2005
    • 119
    #1

    Weird e-mag problem

    I went to test the new child today and it was great(dry fireing)!! I then put on my warp feed, plugged it in to the board and it was making the power go in and out. Every time I tried to switch fireing modes, it would cut the power and reconnect. I'm thinking that maybe its the wire itself because when I unplugged it from the board, it was fine. Anybody have any input on this??

    Also, I had a severe velocity drop when in auto at 20sps.....I dont plan on running it like that but the mag seems to not be up to par and I just want it to be fully functional (in case I want to show off here and there). I dont think it was tank pressure because it was somewhere around 2500 psi on the gauge. Please help...
    Tags: None
    • FlawleZ
      Xmodded Karta Emag=sold ;(
      • May 2004
      • 824
      #2
      Originally posted by feildsweeper13
      I went to test the new child today and it was great(dry fireing)!! I then put on my warp feed, plugged it in to the board and it was making the power go in and out. Every time I tried to switch fireing modes, it would cut the power and reconnect. I'm thinking that maybe its the wire itself because when I unplugged it from the board, it was fine. Anybody have any input on this??

      Also, I had a severe velocity drop when in auto at 20sps.....I dont plan on running it like that but the mag seems to not be up to par and I just want it to be fully functional (in case I want to show off here and there). I dont think it was tank pressure because it was somewhere around 2500 psi on the gauge. Please help...
      Your velocity drop off problem could be due to your reg on your tank. It simply may not be able to keep up. What kind of tank do you have?

      -Splashed Automag RT
      My AO Feedback
      My Ebay Feedback

        Comment

        •
          feildsweeper13
          Ace
          • Jan 2005
          • 119
          #3
          Originally posted by FlawleZ
          Your velocity drop off problem could be due to your reg on your tank. It simply may not be able to keep up. What kind of tank do you have?
          Its a pure energy 68/45

            Comment

            • desslock
              Registered User
              • Jan 2004
              • 199
              #4
              sweeper check all of your wire connections to your board, I had the same problem with my old board cutting in and out even after a full charge. I sent my e mag to Tuna and he advised me my board was fried. Could be you need a new board
              3.2 e mag ULE body and rail. Oh yeah I gots the X inside!!!

                Comment

                • feildsweeper13
                  Ace
                  • Jan 2005
                  • 119
                  #5
                  But it worked fine after I unplugged the warp wire. Theres no problems at all untill that wire is connected. I hope I'm right about the wire because I would go ballistic if my board was fried. Thanks for the info!

                    Comment

                    Previous template Next
                    Working...