e-mag problems

[johnson88]

Alright i went to the field for the first time with my brand new (well i got it used)emag today and i plug in the tank an it was shooting like a dream but then its stops shotting in e. So i just flipped it into mech it would fire for a while then stop. then id unscrew the tank take it apart and it would fire again. Now it wont fire in e or mech. the gun gets pressureized but it wont fire in e or mech. could someone help me out.

thanks guys

[Maggot6]

Same thing happened to me first time I got some air. It seems that around 900 psi in your tank the emag just wont work, then turn it to mech, it'll work 'till 750 ish. Then it'll just push the trigger rod back. I was worried, but it was no big deal, just get more air (hopefully)/..The explanation for your regassing your marker is because the elves got back to work

[johnson88]

Same thing happened to me first time I got some air. It seems that around 900 psi in your tank the emag just wont work, then turn it to mech, it'll work 'till 750 ish. Then it'll just push the trigger rod back. I was worried, but it was no big deal, just get more air (hopefully)/..The explanation for your regassing your marker is because the elves got back to work

omg and that would explain why it wouldnt work all the time they only filled it two like 1400 each time and it was my first time there with it so my friends were exssecvily dry firing it goddamn lol thatnks if thats it!!

[johnson88]

anyone else have the same experience?

[johnson88]

Or anybody got any other reasons why this could be happening to me?

[johnson88]

that didnt work....my mag is t3h gay have a full tank and still no work....

[frischtr]

Just to make sure, you do have a high output pressure tank, correct?

[Aleis]

Yeah Mags require high input presure and some preset reg. tanks don't output enough, try barrowing a freinds, also make sure you put about the same amount of torque on the two screws that hold the gun together if your Mag has a LvL10 valve this can cause it to pinch the bolt.

Also the High input preasure also means that it won't work when your tank gets down to the mid hundreds, or if it's an old valve even high hundreds of PSI.

[johnson88]

alright i got it to shoot in mech mode i dont kno how but i did but no my charge(radio shack 12v 1500ma w/ k tip[its purple]{like havoc instructed}) and it wont charge up for me so i think thats why it wont shoot in emode. Also the battery sounded loose in the housing so i put a piece of paper under it to stop it from moving. Im pretty shure the gun has level ten and i have the shortest spring in with a green spacer,i think thats what its called.

[johnson88]

Alright ive narrowed down the problem to the charger, adapta plug(wall adapater tip), or battery. What tip should i have gotten?

[Tunaman]

The adapta plug should be an "M" tip. Make sure that the "tip" is matched up to the "+". If you connected it backwards even for a second and plugged it in the charger is shot. Let me know.

[johnson88]

The adapta plug should be an "M" tip. Make sure that the "tip" is matched up to the "+". If you connected it backwards even for a second and plugged it in the charger is shot. Let me know.

so m tip and my charger is dead now!?(the one that goes on the battery pack right, The 70 $$ one ?)