First X-Mag Problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Danz
    Registered User
    • Oct 2002
    • 71

    #1

    First X-Mag Problem

    Greetings,

    I played with my X-mag about a month ago and it was working perfectly. After the days play, I put the marker in my gear bag and it sat there until about a week ago. I tried to turn on the marker but the display would not light. I assumed I stored it with the power left on and the battery was drained. I recharged the battery but the display would still not light up. I borrowed a friends X-Mag battery incase my battery was damaged. The power would still not come on even with his battery. Anyone ever run into a problem like this?

    Danz
  • johnson88
    Registered User
    • Jan 2005
    • 148

    #2
    ajust the hes magnet further out cheack all the wires the connecting rods.

    Comment

    • temilotzin
      Little Huitzil XT00354
      • Mar 2003
      • 204

      #3
      Adjust the trigger magnet.

      Comment

      • Maggot6
        Registered User
        • Aug 2004
        • 1527

        #4
        Well, the "HES" sensor needs to be far enough from the magnet so that it does not give mixed messages to the board. So do as the guy above says and just ajust the trigger magnet... AS well, take of your rail and see if the wires are getting pinched by anything. And of course, look at your board if there any missing pieces

        Comment

        • Danz
          Registered User
          • Oct 2002
          • 71

          #5
          GOD I LOVE THIS FORUM!!!!!

          Thank you all for your suggestions! I will give them a try tonight.

          Danz

          Comment

          • Danz
            Registered User
            • Oct 2002
            • 71

            #6
            Greetings.

            Well I adjusted the trigger magnet as far away as it will go from the HES sensor and still nothing. I removed the rail to check the wires. Everything is connected and the wires are undamaged. Im lost.

            Danz

            Comment

            • Tunaman
              Specialized AGD Tech

              • Dec 2000
              • 8643

              #7
              send it here. I'll fix it.
              Email me for low prices on ALL AGD Products and more. [email protected]
              Tunamart

              Comment

              Working...