help on istalling foregrip

[vlhockey22]

i have a question about installing my foregrip. I have one that is supposed to fit directly into the gun i dont need a vert adapt. or anything like that but i cant find anything when i searcrh for the hole in th frame where i should install the grip. Some one please let me know if i am going about this the wrong way.
thanks

[paintbattler]

ok. take off the body. then at the front, there should be a allen wrench style screw. u unscrew it and out that forgrip on

[Magsrule3]

Look in front of the trigger guard. If there is no hole then you will need to drill out the small amount left there. Im not sure what size bit you need but someone else should know.

[vlhockey22]

well arent automags supposed to comewith the hole pre drilled?

[athomas]

The hole is intentionally left slightly filled for those people that do not want to use a vertical ASA or forgrip. The hole is easily knocked out with a punch or drilled as mentioned previously. When you take the body off the rail, you will see the hole indent from the top. Just punch it out, put the forgrip on and fasten it with the supplied screw. Done.