Mag Bodies

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tigwldr
    I Weld for Money
    • May 2005
    • 167

    #1

    Mag Bodies

    I am looking at a body to buy and I ran across this really cool looking one. It is a little bit longer than most I have seen and it has slots cut in the end of it like a machine gun shroud. It is a left PF also. THe only other mags I have seen this on is Minimags. Is this a mini mag body? Will It work on an intelliframe as a regular Mag?

    This is a link to a thread of the exact body I am looking at.
  • TMAXXKING1
    ROGUE HAS THE GOOD STUFF
    • Aug 2004
    • 1325

    #2
    yup

    yup it's a minimag body and it will work on your classic mag ..
    Last edited by TMAXXKING1; 06-02-2005, 11:39 AM.
    My Automags.org Feedback

    www.themagsmith.com


    Comment

    • Tigwldr
      I Weld for Money
      • May 2005
      • 167

      #3
      What makes it a mini mag? What is the difference in a mini mag and a regular? If the Mini mag has a bigger body what makes it mini?

      Comment

      • maxama10
        Take off every zig!
        • Sep 2004
        • 1497

        #4
        the same thing just body style and well i really dont know why its called a mini mag

        Comment

        • Rift
          mmmm X-Dallara
          • May 2004
          • 539

          #5
          If you look at general pictures of the mini mag you will notice that they have smaller barrels not your traditional size one. I belive somewher eon the agd site is sais it was modeled after the Tech9 handgun.

          Comment

          • Tigwldr
            I Weld for Money
            • May 2005
            • 167

            #6
            So everything on the bodies line up right? Twist lock barrel stuff like that are the same?

            Comment

            • Dayspring
              aka- The Day Wang

              • May 2001
              • 9664

              #7
              Yes.

              Comment

              • automagking182
                Method
                • Dec 2002
                • 299

                #8
                In the old AGD tech video Tom Kaye does state that the Minimag body is modeled after the 'assault pistol' look of the 1990's, most specifically the Tec-9 machine pistol.

                That is a good question though, why the Minimag is referred to as 'mini' when it is really bigger and heavier. The only differences between it and the Automag is the body and the laser engraving on the valve assembly.

                Good Traders: Pnzrfst, NATO, Kai, buckwheat05


                *Official Automag Pictures*

                My Feedback

                Comment

                • Tigwldr
                  I Weld for Money
                  • May 2005
                  • 167

                  #9
                  Thanks for all your help.

                  Comment

                  • Spacemanvic
                    Pennsyltuckian
                    • Jan 2005
                    • 184

                    #10
                    Tig:

                    THere's about 3 of us in line for that mag body LOL

                    Comment

                    • Dayspring
                      aka- The Day Wang

                      • May 2001
                      • 9664

                      #11
                      I have to look, but I think I have a minimag body sitting around too.

                      Comment

                      • Tigwldr
                        I Weld for Money
                        • May 2005
                        • 167

                        #12
                        Space I have one in the mail on the way to me. LOL you can have that one if you want it.LOL

                        Comment

                        • Spacemanvic
                          Pennsyltuckian
                          • Jan 2005
                          • 184

                          #13
                          Did you get that from Danger? He said he was still waiting to hear from someone called "Alpha" to see if he was still going to buy the body and the valve. I just needed the body. Hopper on right side of body.

                          Originally posted by Tigwldr
                          Space I have one in the mail on the way to me. LOL you can have that one if you want it.LOL

                          Comment

                          • Tigwldr
                            I Weld for Money
                            • May 2005
                            • 167

                            #14
                            No I just used that picture as a reference. I bought it from someone. else.

                            Comment

                            • Spacemanvic
                              Pennsyltuckian
                              • Jan 2005
                              • 184

                              #15
                              Ohhhhh...........

                              Originally posted by Tigwldr
                              No I just used that picture as a reference. I bought it from someone. else.

                              Comment

                              Working...