I've got a leak how do I fix?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Ratzo
    Registered User
    • Feb 2004
    • 352
    #1

    I've got a leak how do I fix?

    My Mag is leaking down the barrel.
    I have an X-Valve on my MicroMag.
    It worked great all last season but when I used it this season I found I have a leak.
    If I hold the trigger a little the leak dissapearers, but thats a pain to do that all day.
    I oiled the power tube and on/off but the leak did not go away.
    Could this be a LVL10 problem? Will I have to change spacers?

    Thanx for any help given.
    Tags: None
    • Dayspring
      aka- The Day Wang

      • May 2001
      • 9664
      #2
      Move to a 1/2 size smaller carrier for the level 10.

      But first, gas it up, press and hold the trigger. If the leak goes away, its in the powertube area.

        Comment

        • Ratzo
          Registered User
          • Feb 2004
          • 352
          #3
          The leak dose go away when the trigger is pulled stightly.
          So what would be the fix?

            Comment

            • Dayspring
              aka- The Day Wang

              • May 2001
              • 9664
              #4
              Don't pull it slightly. Pull and hold it.

                Comment

                • Ratzo
                  Registered User
                  • Feb 2004
                  • 352
                  #5
                  Bizzar the leah has gone away.
                  I just hope it does not come back at the tourny on Saturday.

                    Comment

                    • ODARKONE
                      Registered User
                      • Nov 2004
                      • 8
                      #6
                      same prob..but if i hold the trigger..its worse!!!

                      i have the same problem...but..if i hold my trigger down..it huffs and puffs till it's out of air!!!

                      My level 10 was set up by jon at airgun...it has worked perfect till the last weekend...bu ti didnt oil it for a couple of days and then put a couple of cases through it.

                      I'm just tring to figure out what o-ring could have worn out and is causing the leaking.

                      thanks all, pls let me know what to do(I plan on playing this weekend...but if i cant fix it by then i'm screwed.

                      ya stil rule tom...till the end of days bro.
                      Louis

                        Comment

                        • Dayspring
                          aka- The Day Wang

                          • May 2001
                          • 9664
                          #7
                          If you hold the trigger and it still leaks, change the orings in the on/off assembly.

                          Retest. Then go from there.

                          Originally posted by ODARKONE
                          i have the same problem...but..if i hold my trigger down..it huffs and puffs till it's out of air!!!

                          My level 10 was set up by jon at airgun...it has worked perfect till the last weekend...bu ti didnt oil it for a couple of days and then put a couple of cases through it.

                          I'm just tring to figure out what o-ring could have worn out and is causing the leaking.

                          thanks all, pls let me know what to do(I plan on playing this weekend...but if i cant fix it by then i'm screwed.

                          ya stil rule tom...till the end of days bro.
                          Louis

                            Comment

                            Previous template Next
                            Working...