customizing an old revy

[DaXtremeist]

ok i have an old 9 volt revy. that i no longer use cuz im getting a halo. so Ive been thinkin of things to do with it and 1 was to make it better and posibly toast it.

so i was thinking if i could replace the servo that spins the paddle with a 18 volt model car engine purchased from radio shack wich will work on 9 volts also. and then i would hook a customized paddle to it (flexible arms)
the engine will hit
9200 rpm at 9 volt
13200 rpm at 12 volt
18000 rpm at 18 volt

will these speeds be to high for a hopper? and would burning up the model engine motor be a posibility do to the balls constantly stoping the motor?

[BTAutoMag]

good god man with that much rpm you could just open your hopper and let the balls fly out and hit someone. i suggest shoving a paintball in a shotgun it would be safer.

[deded]

You could try to make it intellifeed... and then if you mess up it won't really matter.

Or you could just give it to me

:)

[sicones]

if the paddle you use has no sharp edges then it would work I made a revy out of the 12 volt motor from radio shack (cat#273-255) and a 9 volt battery I think it came out better then a real revy