warp problems
I read through the warp manual and as far as I can tell it makes no mention of this problem. My warp will not pick up any sensor motion when I fire my marker, I am pretty sure it is a PTP model. Even when I tap it, it will not turn on. everything else works fine, when i press the pressure switch it runs fine, it will just not feed while I am firing. I am using it on the same marker i have used it on for a year, a minimag with 800 psi input, plenty of kick to run the warp... any help would be appreciated.
-
Minimag, 16" Dye Titanium, Benchmark double finger, phase II, level 10, 88 4500, warp. -
Intellifeed it. -
ok you have to do is take off the back black pannel were the gear drives and circet board is.
after thats off there should be a little blue thing at the top right of the circet board look here at this pic.
thats the sensor addjustment thing
theres an other picture of the sensor addjustment and the sensor it self.
if you cant read what i put in the pics lmk
soo jest tap the warp and if it activates easlly than you are set. jest dont make the sensitivity to much soo when you run or move it feeds
hope this helps i had the same problems with my warp a while ago. its easy to fix somtimes you have to addjust the sensivity from time to time
"Let them eat war [x2]
~my e-mag~
~ule frame~
~ule rail~
~x-valve~
~3.2 software~
~polished no-rise body~
~black 10" freak kit~
~smoke halo b~
~Fl05283 68 3000 flatline~
That's how to ration the poor
Let them eat war [x2]
There's an urgent need to feed"Comment
-
cool, thanks for the help, pics really help. I'll try that out and let ya know~!Minimag, 16" Dye Titanium, Benchmark double finger, phase II, level 10, 88 4500, warp.Comment
-
I had this problem as well... We tried everything... The only thing anybody could come up with was that it may have been a bad sensor... So I just ended up intelli-feeding it...Comment
-
Welp, i tried adjusting it and then tapping the side, I just cant get it to run at all while tapping it. I guess it must be the sensor, it looks like it has some very light brown discoloration on it so it may be bad, Tuna, if you are reading this shoot me a price, or if anyone else has a new warp sensor lemme know. thanks!Minimag, 16" Dye Titanium, Benchmark double finger, phase II, level 10, 88 4500, warp.Comment
-
just took another look at my warp, i popped out the sensor and wiped it off, didnt seem dirty, just kinda discolored. Anyways, the sensor is run off of the spring feeding through the body and making contact with a contact on the circuit board right??? well, I am able to turn the sensor and get a quick spin of the motor but I have yet to get any response by tapping the case. just to make sure, the spring does sit where it can cross 1 of the 2 leads running from the center of the sensor to the outer edge, it doesnt run on the outer metal edge, right??Minimag, 16" Dye Titanium, Benchmark double finger, phase II, level 10, 88 4500, warp.Comment
-
before i intellifed my warp, i could tap my warp with my finger all i wanted and it didn't respond. then i tried useing a screwdriver to tap near the sensor, and it worked fine.upgrade fund: $145
Comment
-
OK, so i got a parts list for intellifeeding my warp, went to radioshack, got all the parts, I plug in the 3/32 phone jack to the warp (power on center pin, ground on outer[larger] pin) and have the microswitch wired just like the pictures I have seen, my warp runs fine when I push the whit power button, but when I hit the microswitch nothing happens. any ideas? thanks guys!Minimag, 16" Dye Titanium, Benchmark double finger, phase II, level 10, 88 4500, warp.Comment
-
got it figured out, had to move some of the shunts around... thanks for the help guys.Minimag, 16" Dye Titanium, Benchmark double finger, phase II, level 10, 88 4500, warp.Comment
-
make sure you have the switch adjusted right in the grip. i havent adjusted mine yet, but most of the time when i shoot, the warp will keep spinning, then if i do a quick burst, it stops. so fire air or balls through it when you adjust the switch, so you know you have it in the right spot.upgrade fund: $145
Comment
Comment