AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026.
Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
every time i air my mag up and fire it air leaks out the barrel. What do i need to do in order to fix this problem. I have tried adjusting my regs but that did not seem to work.
thanks
potter
Do a quick search and you will find the answer. This is a very common problem with mags. If it's a level 7 mag, hop on airgun.com and read the manual. If it's level 10, take a look at the level 10 thread that is stickied.
Basically, if you hold down the trigger and it stops then it's a problem in the power tube. PT oring or spacer if it's Level 7. Oring or carrier size too big if it's level 10.
If you hold down the trigger and it still leaks, it's and on/off problem. Replace all the orings in the on/off.
Comment