Gun not getting air

[Colin2]

Hi. I just bought a mag and got it here today. I put the nitro tank in, screwed down the on off and fired- all I got was a little puff of air each time. I could feel pressure with the trigger from the air, but it was not firing. So I unscrewed the tank and put it back in, and I didn't even get any pressure on the trigger at all. Do any of you know what this could be? Thanks.

[Dayspring]

Try turning up the velocity. Also, drop a few drops of oil into the air line before gassing up.

[hockeynoodles020]

Hi. I just bought a mag and got it here today. I put the nitro tank in, screwed down the on off and fired- all I got was a little puff of air each time. I could feel pressure with the trigger from the air, but it was not firing. So I unscrewed the tank and put it back in, and I didn't even get any pressure on the trigger at all. Do any of you know what this could be? Thanks.

was there air in the tank...

[MonsterMag]

Yeah mags need about 1000psi in the tank to work. Also is your tank high or low output preasure?

[Colin2]

LP with 2000 left in the tank.

[Dayspring]

LP tank won't work. Need HP.

[hockeynoodles020]

LP with 2000 left in the tank.

dont hold me to this...but im pretty sure,unless its a "smartbox" mag, that it needs high pressure.

[Automaggot68]

dont hold me to this...but im pretty sure,unless its a "smartbox" mag, that it needs high pressure.

The Smartbox mag still needed a high pressure input.
The Box didn't do anything signifiacnt.