New Built emag.. new problems!

[SpitFire1299]

I built an emag.. it has 3.2 software, Xvalve, and stock rt on/off..

My problem is.. when i gas it up and try to shoot it on mech its just a really hard trigger pull, and nothing happens at all... its just a huge and heavy trigger pull. Then.. on mech it just clicks.

Maybe i need to go one size carrier bigger?

Also i have an adjustable tank so im putting in like 600psi.

[VFX_Fenix]

You need an E-Mag On/Off pin. Also, check to make sure the o-ring on the top of the On/Off assy. is seated properly since that'll make it near impossible to pull the trigger in mechanical mode.

[SpitFire1299]

Everything is seated correctly.. i never heard of an emag pin.. Is there anyway i could like mod mine or something?

[Maggot6]

I'd highly suggest you don't mod your pin, and same with AGD's warranty....

[SpitFire1299]

I dont have a warranty though...

[Maggot6]

I was just stating that AGD doesn't reccommend it either. Talk to Tunaman if you want to know exactly what parts etc to get, and order them from him. :)

[SpitFire1299]

Wouldnt an emax valve have the right pin though?

[Big'n slo]

Pin length is the diffrence. Standard Rt pin is 0.750" and the Emag pin is 0.712"
If I remeber correctly

Email Tuna, he prolly has a couple floating around

[Big'n slo]

Wouldnt an emax valve have the right pin though?

It should but if it was used on a mech marker it was prolly changed out

[SpitFire1299]

I measured it and it is the RT one.. Arg... i wish i could just cut it down or something for now. Im dissapointed that theres a .038 difference that wont allow me to play

[Tunaman]

If you can measure it correctly as it looks like you can, just rub it on a file and keep checking it till it gets down to .712.

[SpitFire1299]

Cool! i did that and it worked.

[BigEvil]

Also make sure you have the special quad oring in the top of the on off. Its a black oring that is specific to the emags.

[SpitFire1299]

I have that too.. they should put those on rt xvalves too because its good at holding the 2 orings together.

[MonsterMag]

I hope you were joking when you said that tuna