whats a good electric hopper for a mag

[islandmag]

i have a 68 automag level 7 no ups but planning on them and evenualy a e or x mag. i have asked around at the shops were i live and each one told me differantly revy, egg,or reloader i need your suggestions i have a big game in 2 weeks thanks

[M.Don]

a revy would be fine for your automag, but when you start talking about Emags and Xmags youd realy need a relaoder b or halo. basicly if you want a consistent feedrate above 15bps you cant rely on an agitating hopper (e.g. revy, egg etc) it need to be forcefed so your choices are halo b, reloaded b, warpfeed, or the Qloader.

[Maggot6]

My first mag was a level7 classic. I got a revvy, worked fine. I got an emag, the level 10 didn't like it, so I got a warpfeed. The warpfeed and revvy cost less than a halo combined too :)

[X_Automag_X]

Also, you can use a Ricochet 2K, or a 2KX (newer model, supposed to be 2-3 bps faster) also, I have a similar set-up and have yet to have a mis-feed

[paint magnet]

I really don't think feed rate is much of a concern, so I'd go with whatever balances your setup the best. Or you could go ahead and invest in a Halo B / Empire Reloader B if you plan on eventually having a gun that will need a loader that fast.

[MoneyShot]

i would start off with a revy, and because thats what i use and it works great

[islandmag]

thanks guys i'll probably go with the revy

[vadermag]

If you go Halo, make sure to get a big old elbow because those feednecks are beefy.

[trains are bad]

Ricochet Apache.

[Hajari13]

Yo Egg Man Fa Rea

go wif da egg yo. i got mah jank hooked up wif a x-board, we talkin lih 20 bps dawg. dat jank hah, straigh up cuh.
man i puh dat x-board on, my reacton:
OLY SHIH MAN AT JANK FAS AS SHIH!

[monkeyking]

Consider a Q-loader, too. Feeds faster than any hopper, eliminates hopper hits, reloads in seconds, and eliminates hopper hits.

Also, is the post above mine a joke?

[VFX_Fenix]

For a 68 Automag I'd vote for the Revy or a Ricochet 2K. You can go with something faster (Evo II w/ Y or Z board, Apache, HALO B, Warp, Q-loader) if you plan on getting any speed upgrades later on and you can afford the $60+ it'll cost for one of these more advanced loaders.

And I think the guy above you installed his X board into his Evo while plugging the Y-Board into his computer.

[gothsqwd]

Ricochet 2k. The Ricochet's actually do make paint bousce off the sides and top on many occasions, and they are pretty duarable. And the 2K is just as fast as an egg and sturdier.

[MoneyShot]

go wif da egg yo. i got mah jank hooked up wif a x-board, we talkin lih 20 bps dawg. dat jank hah, straigh up cuh.
man i puh dat x-board on, my reacton:
OLY SHIH MAN AT JANK FAS AS SHIH!

English please...

[SpitFire1299]

go wif da egg yo. i got mah jank hooked up wif a x-board, we talkin lih 20 bps dawg. dat jank hah, straigh up cuh.
man i puh dat x-board on, my reacton:
OLY SHIH MAN AT JANK FAS AS SHIH!

I would get a halo B or an Eggy, then you wont need to get another hopper ever again.