Unfixable Automag RT?

[sniper.007]

I have taken my RT to the Local PB store and had a new parts kit installed 3 calls to airguns tech support.... and some special part from Airguns. i am still having leaking... it was from somwhere in the grip but now it sounds more like from the back..... I am at my wits end... the airsmith says all he can think of is to send it to airguns! He didnt charge me for the work but it dosent matter because the guns still not working.
anyone with a RT that has ever had any problem like this please let me know...
all new O rings, parts kit, been at the airsmiths for 4 weeks....
I just want my gun back. any help would be great!

[Dayspring]

Is it a classic RT or RT Pro?

[sniper.007]

Is it a classic RT or RT Pro?

RT Classic

[acuraboom]

this may help

1. put your finger on the velocity adjustment hole. If this is where its leaking turn down the velocity.
2. hold the trigger, does the leak stop? if so release trigger and use a squeege to push on the bolt, if the leak changes pitch change the power tube o-ring (make sure its the right one, play with the bolt when the marker is disassembled, slide it up and down like its fireing, the bolt should kind of stick when you slide it against the bumper o-ring, if its too easy then the power tube o-ring is too large.)
3. If the leak does not change when you use the squeege then it may be either the on/off Bottom o-ring or the on/off SMALL o-ring( the one inside the on/off assembly)
4. If it leaks when you hold the trigger then replace the on/off o-ring
5. if all else fails replace the Regulator valve pin assembly
6. Sometimes those 3 o-rings on the thumb screw above your grip can be the problem.

<a href="http://img143.imageshack.us/my.php?image=helppicture2fn.png" target="_blank"><img src="http://img143.imageshack.us/img143/4356/helppicture2fn.th.png" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>
CLICK TO ENLARGE

Note that 2 size o-rings are used twice in the valve(pictured)
Also not that you should install the regulator valve pin o-ring,regulator seat holder, and regulator seat o-ring into the regulator body BEFORE you screw the two halfs of the valve together. This ensures that the regulator pin assembly is placed correctly( or i should say the o-rings are placed correctly on it.)

Man I really hope this helps! Its all I know to do. Don't get discouraged by these little problems, God knows there are a lot harder markers to fix than mags. GOOD LUCK DUDE

[KayleAGD]

can you get it to the IAO . I will Fix it there , I always seem to get one "gun from HELL" so it could be this one..


Kayle

[BigEvil]

Mine did the same thing once....... A trip to Roman at AGD and it was all better. Sad thing is, he didnt do anything that I didnt. I rebuilt the gun, top to bottom and it still leaked. All they did was the same thing and it was fine. (Actually, it never worked better) which leads me to believe that AGD has a bunch of magic fairies or elves or some supernatural thing going on there teching guns.

[Dayspring]

I have the distinction of being one of those guns. 2 years ago. :)

can you get it to the IAO . I will Fix it there , I always seem to get one "gun from HELL" so it could be this one..


Kayle