Tac One leaking out bolt/ barrel

[ezrhino]

I have a tac one, with the level 10. It has started leaking a small amount of air out of what I think is the bolt. When I squeeze off several shots, it leaks, then if I slightly depress the trigger, putting a VERY small amount of pressure on the RT, the leak stops. Also If I shoot 1 ball through the gun the leak will stop. I took the marker apart, lubed everything, and am still having the problem. I also had a lot of "slop" between the trigger and the RT "spur", so I skrewed it out to the point where it is right against the trigger...

What can I do? Please help me I have a Scenario game this weekend and need it rockin.....

THANKS

[LegumeOfTerror]

use the next size down spacer, and continue doing so until the leak stops.if this dosnt work let me know.

[ezrhino]

use the next size down spacer, and continue doing so until the leak stops.if this dosnt work let me know.

this is my first Automag, so I'm a little gun retarded. Please be more specific in what I need to do....
Where is the spacer located, and where do I get smaller ones?

Thanks for the HELP!

[kevdupuis]

It's not a problem, your lvl 10s just broken in.
First you need to change the lvl 10 carrier to the next smaller size using the same oring that's on the current carrier in the power tube, though the way yours sounds is the way I like to run mine,"fast and loose". The instructions are on the cd that came with the marker, it's petty easy once you've done it. Next you need to readjust the trigger rod so you have a small gap between it and the trigger when the marker is gassed up, otherwise you'll be getting yourself into other problems.