Lvl. 10 Work With CO2?

[SPECK]

I have a 68 Classic Valve. I run it on CO2. Will a Lvl. 10 work with this?

Thanks

[SpitFire1299]

Yes.. but for sure wont work as good as it would with compressed air.

[SPECK]

so it will work good.

[Jaan]

It will work just fine in a classic as long as you take the usual precautions agains getting liquid CO2 in your gun.

[lamingo]

I run Co2 through my Classic Mag with lvl 10 it works great no real problems

[bigpoppa7979]

I'm running mine just fine, a few things to look out for though:

Tuning the lvl10 creates lots of leaks, make sure you have plenty of CO2 laying around and let your valve warm up between leaks. I spent 2 days tuning mine with a low tank. once I figured this out, I got it in a couple hours.

You will need to turn up your velocity quite a bit. This made my gun leak out the back. I can only run the shortest spring. The old regulator pistons were not made to handle the pressure of this velocity, a new piston will fix this. I have an old reg spring.

[fshrmn76]

i had trouble tuning my level 10 with CO2 when i had the wrong size carrier in, the CO2 leaking by kept freezing the oring. tuned it with hpa and now it runs great on CO2, just find a friend that will let you borrow their tank