Classic Valve Problems

[Webby]

Hey Webby, First thing I would do is take out the ULT for now. You can mess with that later. I would try the following in this order:
1. Take out ULT
2. Put in stock on/off, remembering to oil the o-rings well
Then air up your gun and test it out. If problem remains, then
1. Try next larger carrier, Remember to use the same o-ring you've been using. Oil carrier o-ring real well. If it leaks then go back to what you were using.

I'll try taking out the ULT and replacing it with the Stock On/off once I find the o-ring that I lost while taking out the valve (apparently it still had gas behind it and the entire assembly shot out, found everything except the tiny white o-ring).

I'm pretty sure I have the largest carrier in the Level 10 right now, 1.5 to be exact. Anything bigger and it just hisses down the barrel.

Thanks for the help!