lvl10 and shooting 2balls

[grant40k]

i just got my mag with a lvl10 i have noticed that it shoots 2balls at once or if the guns pointing down they one of the 2 rolls out? is this normal

[Apple_Pie]

Bad detent...

[MoneyShot]

does your barrel have a nubbin on it? It either the ball detent or your missing a nubbin, or your nubbin is broken.

[grant40k]

wuts a nubbin and where can i find one also how much are detents and where can i find one

[personman]

do you have a twistlock mag barrel? or does your barrel screw in?
if you have a twist lock barrel you need a nubbin, which goes on the side of the bottom of the barrel.
nubbins look like this


or the older ones are made out of wire


detents are 7 bucks a piece in the agd store

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=362&categoryID=16

but you only need one if you have a ule body. if you have a stainless steel body you need the nubbins.

[grant40k]

i have a nubbin and it seems intact. my mag is a 68mag do i need to get a detent for it?

[Stoble]

the nubbin is the ball detent. Check if they are wire or plastic. If you have the old wire nubbin then you should get the plastic ones. If they are plastic then it is probably pretty worn. In the meantime you can take it off your barrel and bend it a little so it will stick out more inside your barrel to keep the balls from double feeding. But since it's plastic it will quickly go back to it's position after about a day of use.

[personman]

yeah if its wire you need to bend it, if its plastic you need to replace it.

also make sure the paintballs you are using arent too small for your barrel.

[grant40k]

ya the paint was too small i think. the nubin is fine. i was usin walmart paint and it had all kinds of odd misshaped balls.

[personman]

yeah that was probably the problem then. what kind of barrel are you using?

http://www.ottersccustoms.com/barrelc.html

[grant40k]

armason twistlock thats all i no.