Will a ULE Body fit on a stock Pro Classic rail?
-
-
Yes, ULE bodies will fit any AGD rail as long as the twist lock connector is removed. The exception is the original Classic RT rail which you don't have to worry about.Except for the Automag in front, its usually the man behind the equipment that counts. -
Also, if you get a ULE warp body (they have the feed neck on the left or right side, not on top) you'll have to either get someone to mill the rail, or just file it down on the side so the feed neck can fit.
You can just pop the twist lock out (push from the bottom, I believe).Comment
Comment