Just want to get a double check on my parts

[ShadowGuy]

So Im putting together a mag from parts, and have zero experience (with mags).... is there ANY parts Im missing from this list? The main thing Im not understanding is what are all the little parts I have to get (that dont come with the main parts).

Pariah Body (comes with detent and neck)
Reverse X-Vavle (comes with level 10 and all the sear stuff?)*
Dallara Rail
Vertical ASA Adapter for RT Pro (do the two scerws come with it)*
Field Strip Screw
Front Frame Screw for RT ULE/RT Pro*
Rail Bushing*
Field Strip Screw Washer*
Pnuematic Trigger (when it comes out, lol)

* means I got it from the agd store

Also, I know which lines and fittings I need already so I just didnt list them....

Thanks

[mstrdbz]

All you have left is a sear pin(doesn't come with the valve), and the asa screws. As far as on the sear pin, if you got the rail from rogue(mag smith), you'll need a am/mm sear.

[ShadowGuy]

OK so now I got the....

Vertical Bottle Buttonhead Screw 10/32 x 1/2*
AM/MM Sear Pin

[sumorai]

When you say the x-valve came with all the "sear stuff", did you mean you've got one of these already? http://store.airgun.com/index.cfm?fu...&categoryID=92

Do you have a trigger frame to use in the meantime? I don't think you're going to be getting a pneumatic trigger frame anytime soon. Unless you're building it yourself, that is.

[ShadowGuy]

When you say the x-valve came with all the "sear stuff", did you mean you've got one of these already? http://store.airgun.com/index.cfm?fu...&categoryID=92

Do you have a trigger frame to use in the meantime? I don't think you're going to be getting a pneumatic trigger frame anytime soon. Unless you're building it yourself, that is.

I meant it as a question.... sorry, does it come with all the sear stuf, minus the sear pin?

[sumorai]

No, the x-valve is just the x-valve and level 10 kit. You'll need a sear (the link I posted above) and the sear pin, which you can get here:

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=406&categoryID=92

Are you going to get a trigger frame to use until you can get one you really like? I saw some standard AGD single trigger frames in the Buy/Sell forum for like $5. (They're $25 from airgun.com)

[fdjizm]

the x-valve does come with a sear but it only fits on classics automags and minimags, if u got a rail from rpg or any newer rail(nicer) u need the rt pro sear, its a little different, its thicker and has a bushing and u will also need an rt pro sear pin for that.

EDIT** never mind u have a dallara rail that uses the classic mm sear.. so all u need is a sear pin..