drop with a warp

[zeevann]

i am looking for some suggestions.... i have a warp feed and i am looking to buy a drop forward... the problem is i have a 91 ci tank and i tried a few out but the tank hits my warp feed..... is there any drops that go more than 2.5 inches down or a warp braket that will put it out enough

please help me out



much apreciated ~zeevann

[zeevann]

up

[Phantom_Mag]

KAPP Drop Zone 3. Thats what i use works great.

[wanna-b-ballin']

i had the same problem. i took a long drop forward off my old gun, put it on my warp fed mag, and then i couldn't screw my tank in. this was with a 68 ci tank though. would a bigger tank be wider?

i just adjusted the warp to where my hopper would sit on it parallel to the gun, and to where i could screw in the tank. problem was that my fill nipple cover was hitting the warp and preventing me from screwing in my tank. so now, my warp is set to be comfortable, and i can screw in my tank if i take off the nipple cover.

now the bigger problem is that the drop is too long. my mask hits my hopper if i shoulder the tank.

[ben-afficial]

try that kapp drop, its ugly as shoe but it works great