My automag classic has an older rail that doesn't have a hole for a foregrip, the detent is there to drill the hole for the vertical bottle adapter, I was just wondering what size drill bit is needed to put the screw for the vertical bottle adapter in the rail.
-
-
no drill bit
no drill bit needed ..
take the body and valve off the rail
look at it from the top you will see the hole ...
there is a thin peice of aluminum that needs to be knocked out ..
a punch or a screwdriver will do it ... -
that worked excellent, I used a punch and hammer, now I just need to file down the frayed endsComment
Comment