HELP !!! Level 10 tuning and operation

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • VnV
    Registered User
    • Aug 2005
    • 52
    #1

    HELP !!! Level 10 tuning and operation

    Ive hade a rt pro mag with a level10 bolt and xvalve (matching serials) for alittle while now and the guy i got it from said it make need some adjusting with the trigger shims? I know that somehow the trigger shims also effect the bolt operation.
    The gun will fire just fine then every once in a while maybe 1 time in 50 shots, the gun will fire and then the trigger doesnt pop back and a few seconds later the bolt will hiss (like an internal leak) and itll pop back to normal firing again.
    I dont really understand the level 10 completely except for its basic operations.... ive only had a mag for about 2 weeks and have played with it once.


    Let me know how to go about replacing or adjusting shims and if its not that what is it? a link or step by step would be nice.

    HELP and thanks on advance. PM or get me at vnvnationalist.
    Tags: None
    • VnV
      Registered User
      • Aug 2005
      • 52
      #2
      CMON guys im not believeing that in a forum mostly of automag owners that love their guns there isnt someone in the crowd that now the level 10 in and out that can help me.... i have a game tomorrow and sunday and need all the shots i can get. PLEASE

        Comment

        • Mer
          Just looking.....
          • Jun 2002
          • 321
          #3
          Here's a start:

          404 Not Found
          http://www.automags.org/resource/level10/index.shtml

            Comment

            • VnV
              Registered User
              • Aug 2005
              • 52
              #4
              ok so someone just gave me a hint that it may be trigger shims, and the trigger maybe short stroking.... this help to expain it better?

                Comment

                • VnV
                  Registered User
                  • Aug 2005
                  • 52
                  #5
                  Originally posted by VnV
                  ok so someone just gave me a hint that it may be trigger shims, and the trigger maybe short stroking.... this help to expain it better?
                  Process made... i geuss ill talk to myself on this one and hope people will mayb e learn from it unless your all just holding out on me.
                  i took apart the ult assembly that is inside the bolt... piece of brass that you pop out with a flat head, so theres 4 silver wacher "shims" in there and im geussing that taking some out or adding them might help? i dont no put ill test it tonite...

                    Comment

                    • VnV
                      Registered User
                      • Aug 2005
                      • 52
                      #6
                      I found that the LX has only 1 shim in it! and the ULT has 2 right now... sooo i think im stuck until i have more. But for some reason i gased up after i put back together and i had a shot a few times (very erractic), mostly curve balls so i turned down the velocity. After that it wouldnt shoot, maybe the velocity was to low because i didnt even have a stiff trigger. So i put it back and ill have to play with it

                        Comment

                        Previous template Next
                        Working...