I have a RT Pro, ULE, X Valve, Level 10, Intelliframe, ULE Trigger Kit.
The trigger will not reset. The marker will shoot fine a few times and then it will stop because the trigger will not reset. Sometimes when I push on the bolt the trigger will reset and sometimes it will not. I have tried different length bolt springs without any change. The level 10 works perfectly it will stop on the tip of my finger and reset. I do have several shims in the ULT, just for added fun, it works great lots of reactivity. I am at a loss. Please HELP.
A couple of points that I need to add. I am using the smallest carrier and the rod behind the trigger is protruding a small amount, it does engage the trigger although not enough to fire the marker.
I have gone from a #.5 carrier to a #.0 to a #1 and back to a #.5 carrier. At the .0 and the .5 I get bolt stick. With the 1 the bolt stick is reduced, it is still there although it will reset itself if I wait a couple of seconds, the big problem is air leaking down the barrel.
I have removed shims, added shims, to both the level 10 and the ULT. No change it is either bolt stick or air leak down the barrel.
HELP.
The trigger will not reset. The marker will shoot fine a few times and then it will stop because the trigger will not reset. Sometimes when I push on the bolt the trigger will reset and sometimes it will not. I have tried different length bolt springs without any change. The level 10 works perfectly it will stop on the tip of my finger and reset. I do have several shims in the ULT, just for added fun, it works great lots of reactivity. I am at a loss. Please HELP.
A couple of points that I need to add. I am using the smallest carrier and the rod behind the trigger is protruding a small amount, it does engage the trigger although not enough to fire the marker.
I have gone from a #.5 carrier to a #.0 to a #1 and back to a #.5 carrier. At the .0 and the .5 I get bolt stick. With the 1 the bolt stick is reduced, it is still there although it will reset itself if I wait a couple of seconds, the big problem is air leaking down the barrel.
I have removed shims, added shims, to both the level 10 and the ULT. No change it is either bolt stick or air leak down the barrel.
HELP.