Hi guys. My mag performs faultlessly, but after turning a friend on, he has major problems with his. He has a "center fire min-mag" serial number 00024. At least that's what the valve says. It has the original valve with a lvl 10, DM4 reg, and ULT trigger kit. He has never had this thing function properly. Problems in not having the valve function got real bad after installing the ULE. Is it possible to purchase a spacer kit for the ULE trigger? Any help would be greatly appreciated. Love ya'all and keep shootin straight.
-
-
#1 Remove the DM4 reg.
#2- use level 10 shims in the ULT. 1 Level 10 shim = 2 ULT shims.
#3- ULT wasn't designed for a classic valve. It may never work correctly.
Originally posted by wardog187 -
Like what Dayspring said, the DM4 reg should be taken off or unconnected from the air source. Mag's are supposed to be run on direct air from the ASA to the valve. The valve has a built in regulator that regulates the pressure down to 500psi i think.
Also, the ULE trigger cannot work on a classic valve. Only Retro Valves and X-valves only. Unless you have skill to mill the on/off then the ULE trigger is useless.68 Automag
Black ULE Mainbody
Black Inteliframe(Grooved)
AA Barrel
Flatline 68/30Comment
-
You don't have to mill the classic valve to make it fit. Only the older ReTro valves.
And you MAY be able to get it to work on the classic. No way to really tell.
Originally posted by frontsniperComment
Comment